Electronics and electricity services
www.fanofa.com
Electronics and electricity services
Pot Light Building Electrical Services with Experience 6477798040
Contact number: + 16477798040
Electrification of the building to a set of electrical works of the building, including repair and renovation of building electrical wires, replacement and installation of electrical outlets and switches, hidden ceiling light, wall sconces and interior lighting, optimization of fuses and renovation and installation of fuse boxes, electrical panels, antennas Central, security systems and….. Three-dimensional interior design before building electrification is one of the most important factors in improving the building electrical system in reconstruction (especially hidden light) In a way, determining the desired lighting locations (sconce lighting and hidden lighting) must be determined before electrifying the building so that the built-in lighting system can be implemented, otherwise the electrification of the building will be superficial, which will not naturally have a pleasant effect. Also, the kitchen of a residential unit needs engineering and basic electrification. The location of the sockets in the kitchen and the type of application of each socket is very important. For example, the socket of a washing machine and a microwave oven should not be next to each other. Because if these two devices are used simultaneously, high pressure on the wire line will lead to melting of the wire cover. Also, do not forget to wait for the hood and light of the lights under the kitchen cabinets. Due to the fact that LED lamps are used for under-cabinet lighting, the use of 1.5 wires is sufficient for this purpose.
As a general rule, 2.5 wires are used for electrical outlet wiring and 1.5 wires are used for lighting wiring. Also, for lighting, type B miniature fuse and for socket, it is better to use type C miniature fuse. It is also best to use a fuse of at least 25 amps. Otherwise, it is very likely that the fuse will overheat and jump if the power supply is pulled too far by the appliances. Some employers use a stabilizer. The stabilizer device, known in Iran as Faratel, is a device that prevents power fluctuations. In fact, the Faratel device prevents shocks caused by fluctuations in city electricity. To use the stabilizer at home, we first install a suitable place near the fuse box. Considering that the weight of the stabilizer device is about 40 kg, the strength of the manufactured place must be ensured. Then the utility power coming from the main meter of the building should be connected to the stabilizer device and output from the device to the fuse box. In this way, the entire electrification of the building will be equipped with a city power oscillator or stabilizer.
The diameter of the consumable wire is determined based on the electrical engineering table of the building. Scientific determination of wire diameter prevents the occurrence of amperage drop and voltage fluctuations, especially in office and commercial buildings and homes that use several high-consumption air conditioners. If the fuse box is not selected in accordance with the consumption amperage, during the peak hours of consumption, the fuse box will cut off the electrical system to prevent damage to electrical appliances, which is called a fuse.
Intermittent and annoying fuse box cuts usually occur in commercial buildings, and choosing the right fuse box is very important in preventing it. Also, if the diameter and length of the wire are not selected in proportion to the power consumption of the building, the current resistance in the wire will increase, which will result in melting of the plastic cover of the wire and fire of the fuse box. Building electrical wiring fires are more common in office units, which can be easily prevented based on the building's electrical engineering tables.
www.fanofa.com
Comments
Post a Comment